The little MINI it retains all the main features of higher-end press brakes and is available in two models: MINI GP 515 and MINI GP 815, both of which can be integrated with numerical control.

Compact: Its small dimensions make it suitable for small spaces and above all for all companies that bend small parts with more or less significant thicknesses.

Need: Desired angle adjustment during the bending phase instantly under pressure.

User friendly: Standard version with the possibility of easy adjustment of parallelism, PMI and bending angle with height displays.

Security: Mini GP press brakes are approved in accordance with CE regulations. They are equipped with emergency buttons, the pressure of which allows the immediate stop of the movement of the lower crossbar.

Compact and robust structure: The supporting structure of the machine is composed of the frame and the monolithic "swan neck", rigidly fixed to each other. The gooseneck and the electrical panel are therefore mounted on the frame. The fixed upper crosspiece and the hydraulic part, designed to move the lower crosspiece, are fixed to the gooseneck. The lower crosspiece is mounted on special self-lubricating guides. The entire supporting structure of the press was designed and built seeking the best rigidity and non-deformability of the parts. All components have been appropriately sized and checked to ensure high reliability over time and resistance to the stresses to which this type of machine can normally be subjected.

Ease of use: All the controls have been created to guarantee extreme ease of use, right from the first piece.

Lean angle: it is possible to position/record the desired bending angle instantly by adjustment during the bending phase with maximum precision and ease. The standard version features a series of elements that make use more practical, such as the height displays for the Y-X1-X2 axes.