G Code designs corsi of training for millers, turners e programmers on machines a CNC CNC. Let's unite in oneunique formula theoretical teaching e practical training in the laboratory, to allow future operators in the sector to learn quickly but effectively. We count with a team of qualified professionals and with several equipped laboratories with CNC machine tools to carry out practical tests on the processes. This allows us to to broadcast adequately skills , passion that the sector requires, with a training which is part of the plan Industry 4.0 e Fondimpresa.
The course "reading the technical drawing” aims to make new operators acquire le knowledge necessary for reading e interpretation of a mechanical drawing, a fundamental skill to correctly carry out any task in the field of mechanics.
New traders will be taught to understand how to check if the particolare è as seen here measures and required tolerances from the drawing. Many times we assume that everyone knows understand a mechanical drawing, but unfortunately this is not always true. The risk is not only that of making a mistake on a dimension, if not seen by the operator, but that by not seeing a surface to be rectified or a surface treatment, the entire production cycle will be interfered with.
The course “Basic Turning ISO” will allow operators to learn le basic notions of programming, with the benefit of starting to modify a program to improve a machining operation (a drill that keeps breaking, lengthening a thread depth, an insert that does not chip well, etc.).
Within the course will also be explained the manual operations da carry out on board the machine such as mounting e tool reset, together with all the activities necessary to restart a production cycle already produced in the past. L'learning of these manual operations è fundamental to relieve the technical manager of a department of the task of equipping the machine for parts already performed by the company in the past. In this way, the person in charge will be able to take care of the creation of new details, or better yet, to improve existing cycles, perhaps through the use of new technologies.
The course “Basic milling ISO” will allow operators to learn the basics of programming, with the benefit of getting started change a program for improve a process.
Within the course will also be explained the manual operations to carry out on-board such as mounting and resetting tools, along with all the necessary activities to the restarting a production cycle already produced in the past. L'learning of these manual operations is critical to lift il technical manager of a department from the machine setup assignment di details already done formerly by the company. In this way, the person in charge will be able to take care of the creation of new details, or better yet, to improve existing cycles, perhaps through the use of new technologies.
The course "Advanced turning ISO” was designed to allow operators of CNC machines to deepen their knowledge of ISO programming, to learn how to program quickly a numerically controlled machine.
Through the course programmers will have the ability to learn alcune specifications, useful to improve and make different processing strategies, in a short time. In fact, we often happen to talk to already expert programmers who, however, have a limited vision of their production reality. Dealing with our teachers allows them to improve the analytical perspective of a work cycle, and to question oneself, improving.
The course "ISO advanced milling” has been designed for operators who have already developed a good basic knowledge of programming and who want to develop new skills techniques, for to ease theinterface with the driving feel.
Ai expert programmers the possibility of dealing with qualified teachers will be offered, for improve the analytical perspective of working cycle, understand how to use the appropriate processing cycles, use The tools more suitable and implement the most suitable strategies to work better with tools.
The course "Manual Guide – Turning” will allow the operator to learn how to program a small CAM inside the machine with FANUC control, to make i programs in a very short time (from two or three hours normally spent on a complex program in ISO, to twenty – thirty minutes with the MANUAL GUIDE).
Il Manual Guides it's a powerful one conversational by Fanuc, generally standard in many machine tools, often little known. This course explores all the programming techniques that the Manual Guide offers to numerical control machine operators.
The use of the Manual Guide is also recommended for those who have one minimal knowledge of ISO programming. There will no longer be tools that will get ruined because they are misused, they will be possible create parts with even complex profiles, and before starting the physical realization of the detail it will be possible controllare the whole through graphical simulation.
The course "Manual Guide – Milling” will allow the operator to learn to program a small Internal CAM to the machine with FANUC control, to implement the programs in a very short time (from two or three hours normally spent on a complex program in ISO, a twenty – thirty minutes with the MANUAL GUIDE).
Il Manual Guides it's a powerful one conversational by Fanuc, generally standard in many machine tools, often little used. This course explores all the programming techniques that the Manual Guide offers to numerical control machine operators. A day dedicated to machining strategy, roughing techniques anduse of powered tools, to get the most out of it in a short time and make the most of the features of the Manual Guide Fanuc.
The use of the Manual Guide is also recommended for those who have one minimal knowledge of ISO programming, because in its simplicity it allows to obtain a good autonomy in the programming of a mechanical detail.
GCODE teachers, having been manufacturing company owners prominent, have matured beyond 25 years of experience entrepreneurial, therefore they have the ability to offer themselves as consultants for company production and management, to address any critical aspects together with the company staff and propose new solutions aimed at improving companies.
Our consultancy service consists of support companies ad take the right actions in a sector in which we have already gained experience and whose problems we have already faced.
Our advice can be useful in recommend the most suitable machinery with respect to the specific production cycle, theequipment to use, the skills to focus on in the department (whether or not additional training is necessary), the logic of crossing the various work phases, the management of the quality process of the product and in making the operators always good informed on the production process. With GCODE it is also possible to carry out a training course for quality and testing, which is useful for obtaining company certification.
Furthermore, in our office we carry out courses on behalf of temporary agencies, in order to train new qualified operators, whose skills meet the needs of companies in the sector who want to expand their staff.
CNC BOX is a service offered by GCODE which aims to help future CNC operators to develop or improve their expertise in the metalworking sector: a sector that requires an increasing number of specialized operators.
The CNC BOX provides a day of an ISO course in turning and milling to be carried out in our offices (Bologna or Reggio Emilia) or online to improve one's skills in: advanced ISO programming, Manual Guide and technical drawing.
FROM PASSION PASSION IS BORN
G Code owns the ISO 9001 certification for the EA37 sector, which allows us to provide quality training and professional development courses, financeable through the credit provided by Fondoimpresa: an incentive they can access all businesses, without distinction of legal form and economic sector.
