Chemical products for the surface treatment of metals |
For STAINLESS STEEL: degreasers, picklers, passivators, products for electropolishing, surface finishing, electrochemical marking.
For COPPER and BRASS: chemical products for pickling and dark burnishing. For ALUMINUM: chemical products for degreasing and pickling. For CORTEN Steel: chemical products to accelerate the aging process and aesthetic improvement. |
---|---|
Services |
Sale and repair of electrochemical systems for electropickling, electropassivation, electropolishing and electrochemical marking of stainless steel. Supply of accessories (carbon fiber brushes and pads) and electrolyte liquids for electrochemical systems.
Analysis and controls relating to immersion treatment baths (pickling and passivation) with the drafting of analytical reports. |
Lifestyle |
Supply of wipe kits for the maintenance and restoration of the oxidized surface, tests to verify surface free iron such as FERROXYL TEST (ASTM A380 and A967) and tests to distinguish AISI 304 steel from AISI 316 steel, highlighting the presence of Molybdenum as the MOLYBDENOM DETECTOR.
|
Operating sectors |
Aeronautics, Food, Industrial Machinery, Machine Tools, Valve Production, Other sectors...
|
Work area | 500 mĀ² |
Metals/Materials |
STAINLESS STEEL (gels and liquids for degreasing, pickling, passivation, electropolishing and finishing) - COPPER and BRASS (gels and liquids for pickling and dark burnishing) - CARBON STEEL (gels and liquids for pickling and dark burnishing) - ALUMINUM (gels and liquids for degreasing, pickling) - COR-TEN STEEL (liquids for pickling and oxidation)
|
Welcome to WE-KEM! Our company offers solutions for the surface treatment of metals, developing professional chemical products.
Thanks to the experience gained in the most varied fields of application of surface treatment, our commercial and technical staff is able to follow the customer step by step, offering a consultancy service aimed at analyzing his needs, as well as defining the technology optimal process for its type of production.
WE-KEM, through its staff present in the area, quickly offers solutions and targeted assistance, offering a line of chemical products suitable for the surface treatment of metals.
Are you looking for solutions and assistance for the surface treatment of metals? Discover the range of specific chemical products for each metal
WE-KEM offers a wide range of chemical products for the treatment of stainless steel products.
To ensure thestainless dell 'Stainless Steel, it turns out indispensable a specific work cycle. In addition to those dedicated to stainless steel, the range of surface treatment products also includes ad hoc formulas for Copper - Brass and derived alloys, Carbon steel, Aluminum e COR-TEN steel.
WE-KEM has simple, fast and safe TEST KIT for those who must guarantee e check the state of passivation of its manufactured goods according to ASTM standards, by checking the presence of free surface iron (FERROXYL TEST, COPPER SULFATE TEST) and of a KIT - REAGENT specific to distinguish AISI 304 steel from AISI 316 steel by highlighting the presence of Molybdenum (MOLYBDENUM DETECTOR).
For a first approach and to take the first steps into the world of stainless steel treatment we recommend our convenient KIT in a case ABC INOX KIT, complete with the 4 basic products for the correct work cycle (degreasing, pickling, passivation, finish).
Description: INOX CARE KIT, kit in WIPES for the maintenance of stainless steel, specific for degreasing, deoxidation and protection/finishing of stainless steel. Eliminates and prevents oxidation on 300 series stainless steel surfaces.
INOX CARE KIT was developed for the cleaning/maintenance of 300 series stainless steel surfaces, suitable for every type of sector and finish from satin, polished, sandblasted and flowered.
use: Wipe - Spray bottle
Our specific electrolyte fluids for use in our electrochemical systems they represent the ideal solution for ecological treatment instant (liquids combined with different types of swabs, carbon fiber tips and brushes ) of TIG welding, TIG with material addition, MIG/MAG, Mig Pulsed Arc, laser, resistance, orbital, plasma.
The electrochemical system guarantees the pickling, passivation and polishing of any weld on stainless steel, regardless of the surface finish, without wasting time, without streaks remaining and in total operator safety.
WELD CLEANOX, machine for cleaning welds, capable of carrying out cleaning treatments degreasing, pickling, passivation, electropolishing (thanks to different types of swabs, tips e carbon fiber brushes ), THROUGH THE USE OF OUR ELECTROLYTE LIQUIDS we guarantee treatments of any weld on stainless steel for any type of finish, optimizing times and safely for the operator.
It also supports the ability to perform electrochemical marking on stainless steel.
It is possible to instantly imprint any desired logo / writing / numbers on the metal (stainless steel) in both dark and light modes. The electrochemical principle is achieved through the electrolysis of a neutral liquid (without health labeling) using the appropriate accessories.
To carry out the marking it is necessary to use a silk-screen screen which can be created according to the customer's specific graphics. Or you can use a printer using dedicated software interfaced with the PC where large paper tapes (50m x 100mm h) are used.
This innovative electrochemical system allows you to carry out the classic processes of DEGREASING, PICKLING , ELECTROPOLISHING,
PASSIVATION e MARKING with the possibility of being able to carry out treatments and work with TWO OPERATORS simultaneously. The control panel of our electrochemical system has well 13 functions.
Each time the (MODE) button is pressed the device changes operating mode. WELD CLEANOX S-DIGIT is the ideal solution for instant ecological cleaning of welds and large stainless steel surfaces. On stainless steel for every type of finish, optimizing times and ensuring safety for the operator. The advanced technology of WELD CLEANOX S-DIGIT through the specific output and the great power of its inverter, equipped with inserts from 10cm to 30cm, also allows the treatment of large surfaces, such as, for example, silos in the agri-food or wine industry .
WE-KEM through its staff present in the territory, quickly offers solutions and assistance with lines of chemical products.
Furthermore, through external companies specialized in the sector, it provides a service for all types of surface treatments third parties (pickling, passivation ed electropolishing) both by immersion and in external areas, with the use of specific gels applicable on large objects.
- 304 stainless steels e 316 they can be easily burnished thanks to the use of electrochemical systems produced by WE-KEM. This process occurs with the supply of low voltage current without create
surface tensions on the material. The swab previously soaked in the appropriate one electrolyte liquid (exempt from GHS symbology) will go to carry out a bluing dark grey/black on the surface of stainless steels.
In the photo alongside, this happens Copper and brass burnishing: a cold process lasting a few seconds that allows you to obtain a uniform color on machined surfaces, threads and blind holes, providing a definitive solution to the problem.
The WE-KEM devices, in addition to being used to clean (pickling) and polish welds, have the magnificent function of carrying out the electrochemical marking of stainless steel. It is possible to instantly imprint any logo on stainless steel (using a customized screen) and obtain both a darker and more evident than an EDM marking clearer and lighter.
WHY CHOOSE US?
We are able to quickly propose solutions and targeted assistance, offering a line of chemical products suitable for the surface treatment of metals.
WE-KEM, through companies specialized in the plant engineering sector, provides standard manual and automatic systems, designed to satisfy customer requests, also taking care of the chemical and environmental aspects.
WE-KEM has simple, fast and safe TEST KIT for those who must guarantee e check the state of passivation of its manufactured goods according to ASTM standards, by checking the presence of free surface iron (FERROXYL TEST, COPPER SULFATE TEST) and of a KIT ā REAGENT specific to distinguish AISI 304 steel from AISI 316 steel by highlighting the presence of Molybdenum (MOLYBDENUM DETECTOR).
For a first approach and to take the first steps into the world of stainless steel treatment we recommend our convenient KIT in a case ABC INOX KIT, complete with the 4 basic products for the correct work cycle (degreasing, pickling, passivation, finish).
Thanks to the experience gained in the most varied fields of application of surface treatment, our commercial and technical staff is able to follow the customer step by step, offering a targeted consultancy service.
WE-KEM provides dedicated support through institutes specialized in the certified analysis sector.
They are carried out internally analysis e checks relating to treatment baths (pickling and passivation) with drafting of analytical reports where any corrections to be made emerge, if necessary.